If you want to take home security up a notch then installing a few motion sensor lights around the exterior walls of your home would certainly give a boost. Hardoll LED Automatic Solar Motion Sensor Security Lights for Home Outdoor Garden is definitely something to go for. Let us find more about the product.
Product Description of Solar Sensor Lights for Outdoor
If you are a person concerned about the security of your home and keep the light on throughout the night then this is the light for you. As LED Motion Sensor Lamps for Outdoor Garden works in solar energy, you need not pay extra on your electricity bill. With the help of 3.2V, 4400mAh LIFEPO4 battery, 5.5V, 2W solar panel automatically charges during the day and shines up on its own in the night. If you are out of station but want the lights to stay on at night the Automatic Solar Security Lights would be of great help.
LED Motion Sensor Lights for Home Security comes with 62 LEDs of which 26LEDs (outer) lights up in warm lights while the rest of 36 LEDs (inner) lights up in cool white lights. In the dim mode only the outer LEDs light up and when any motion is detected all the 62 LEDs lights up brightly. Equipped with a Microwave Radar Sensor, it can sense movement within a distance of 40 feet at an angle of 360 degrees and alerts the household by lighting up immediately. Made of IP65 grade ABS plastics, it can withstand all weather conditions and an extra transparent protective casing helps the Waterproof Solar Sensor Lights for Wall to last for a longer period.
Â
Installation Instructions for Motion Sensor Wall Lights
1. Select the Correct Location:
Select a place with most sunlight exposure during the day.
Make sure it covers the space where you want motion detection — near doors, garages, walkways, etc.
2. Inspect the Mounting Surface:
Ensure that the wall or surface is level, solid, and free from obstructions by overhangs and trees.
Clean the area to prepare for installation.
3. Tools You Might Need:
Drill and screws (usually provided with the light)
Screwdriver
Pencil to label holes
Ladder (for high places)
4. Steps to Install:
Use the backplate as a guide to mark the screw holes.
Drill pilot holes in the wall.
Secure the backplate to the wall with the screws.
Install the light fixture onto the plate.
Make sure it's at the right angle to sense motion.
5. Turn on the Light:
Switch on the switch (if provided).
Put the light under sunlight for 6–8 hours to charge the built-in battery completely.
Tips for Care and Maintenance
1. Periodic Cleaning:
Clean the solar panel with a wet cloth every few weeks to clear dust, pollen, or bird droppings.
Clean the lens of the motion sensor lightly to ensure accurate detection.
2. Obstruction Check:
Cut plants or bushes that obstruct sunlight or the sensor's field of view.
3. Battery Replacement:
Most solar motion lights come with replaceable rechargeable batteries.
If the light fades or ceases to function after 1–2 years, replace the battery.
4. Seasonal Adjustments:
During winter, solar charging can be less. Shift the light (if possible) to sunnier locations.
Switch off the light on long rainy days to save battery life.
5. Steer Clear of Artificial Light:
Ensure the sensor is not misled by surrounding streetlights or porch lights, which can decrease motion sensitivity.
Â
